Pacbrake C11400 4in Mounting Group for 1994-2002 Dodge 5.9L Cummins

Product Category Diesel Exhaust Brakes

Brand Category Pacbrake

Part Number PAC-C11400

Features • Allows You to Install an Exhaust Brake on Vehicles with Aftermarket Turbochargers

• Precision Machined Flanges

• No Gaskets Required

• Includes 2 Adapters and 2 Clamps

Exhaust Size 4"

Weight 3 lbs

Warranty 6 Months

Special Notes Warranty registrations must be completed either online or via mail using the provided warranty card in your Pacbrake product kit. All warranty registrations must be submitted within 30 days of the installation date.

Manufacture Info

When installing an exhaust brake there are two different mounting configurations. One of the most typical exhaust brake installation is the InLineMount. For this type of install adapters are required to seal the airflow from the exhaust brake to the exhaust pipe. They are mounted on either side of the brake and clamped into place.

The second type of exhaust brake, for Dodge 2003 and newer vehicles, are exceptions as they are installed using a DirectMount configuration. This type of install does not require adapters as one side of the brake attaches directly to the turbocharger and the other side directly to the exhaust pipe.

Pacbrake's exhaust brake adapters are stainless steel and have machined flanges so that they are perfectly matched when connected to the exhaust brake housing. The adapters combined with the stainless steel V-Clamps, ensure that there is a perfect airtight seal between all exhaust brake joints. This Mounting group includes Two Adapters and Two Clamps to allow you to install a Pacbrake Exhaust Brake in a 4" Exhaust System.